D&R Mic-Amp Specifications

AIRMATE-manual-usb.doc AIRMATE-USB MANUAL V 1.00

AIRMATE-USB manual page: 10 SPECIAL AVAILABLE OPTIONS IN YOUR AIRMATE-TELCO MODULE On the input PCB of your AIRMATE-USB MODULE there are several ju

AIRMATE-USB manual page: 11 5. MASTER SECTION The AIRMATE-USB master section houses all the controls for the summing amps and master inputs such

AIRMATE-USB manual page: 12 BALANCE The balance knob controls the balance between the main stereo output and the stereo Cue signal when selected.

AIRMATE-USB manual page: 13 TAPE OUTPUTS The first connectors on the left are the tape output connectors for left and right for connecting an audio

AIRMATE-USB manual page: 14 2-TRACK INPUTS These inputs are intended to return stereo machines in the monitor section. Such as signals from maste

AIRMATE-USB manual page: 15 6. SETTING UP ROUTINES MODULE 1-4 - Connect a power-amp, recorder or transmitter to the left/right outputs. - Connect

AIRMATE-USB manual page: 16 8. SETTING UP THE TELCO MODULES Connect the two wires of the telephone line’s wall unit to the RJ-11 connector labe

AIRMATE-USB manual page: 17 10. TECHNICAL SPECIFICATIONS MIC INPUTS XLR connector balanced impedance 2 kOhm. sensitivity -60dBu. P

AIRMATE-USB manual page: 18 PHONES: Preferable 400 Ohms or higher! 11. TECHNICAL SPECIFICATIONS INPUTS Mic input balanced 2 kOhm. Plus 4

AIRMATE-USB manual page: 19 12. OPTIONS/MODIFICATIONS Modification AIRMATE-USB (stereo AUX) from 220V to 110V BE CAREFUL! THE AIRMATE-USB POWER

AIRMATE-USB manual page: 2 Dear Client, Thank you for choosing the AIRMATE-USB console. The AIRMATE-USB is designed by speciali

AIRMATE-USB manual page: 20 Step 2: Replacing the fuse. The fuse-box is integrated in the AC socket. The fuse must be replaced from a 0.5A to a 1

AIRMATE-USB manual page: 21 13. ELECTROMAGNETIC COMPATIBILTY This unit conforms to the Product Specifications noted on the Declaration of Confor

AIRMATE-USB manual page: 22 15. PRODUCT SAFETY This product is manufactured with the highest standards and is double checked in our quality con

AIRMATE-USB manual page: 3 1. INTRODUCTION The AIRMATE-USB is equipped with 3 types of input modules. The first 4 triple input modules (1-4) have

AIRMATE-USB manual page: 4 AUX SEND Below the Equalizer there is the stereo Aux send that can be set to send stereo source signals pre or post fade

AIRMATE-USB manual page: 5 SPECIAL AVAILABLE OPTIONS ON MODULE 1 TO 4 On the input PCB of your AIRMATE-USB are several jumpers that can be changed t

AIRMATE-USB manual page: 6 3. USB-LINE MODULE 5 AND 6. * Low noise balanced Mic pre-amp with 48 volt phantom powering. * One stereo line inpu

AIRMATE-USB manual page: 7 FADER Final control is the 100mm channel fader, this is the actual control to mix the signals. All channels have long t

AIRMATE-USB manual page: 8 4. TELCO-LINE MODULE 7-8 Input module 7-8 are dedicated Telephone Hybrid modules with built in high quality Hybrids an

AIRMATE-USB manual page: 9 AUX SEND Below the TB switch there is the stereo Aux send that can be set to send stereo source signals pre or post fader