D&R AXUM User Manual download pdf (Page 17)

Triple Dig Input Module

Airlab from D&R Phone +31 294 418014, email: [email protected] Page 17

PAN

Allows adjustment between the left and right channel outputs.

CUE/SELECT

Stereo pre-fade listening; allows pre-fade listening of the channel with the fader closed.

The CUE function will be automatically TURNED OFF when the channel becomes active.

The CUE switch also generates a start/stop pulse in the line-mode.

The CUE switch also acts as a SELECT switch for the programming of the modules

functions.

Channel on/off switch. The Airlab is capable of sending out a pulse by ON switch as well as

by fader. This is software programmable. In any case the adjacent LED will lit when the ON

switch is activated.

FADER

The linear fader controls a VCA that controls the module's overall level. Electronics sense

when the fader is opened and generates (when programmed) the start for remotely

connected devices.

Digital Output

The Digital output is the PROG-bus or the SUB-bus by Jumper selectable. The output

level (digital headroom) can be trimmed by the internal level trimmers

(see also chapter

12).

The audio signal on the AES3-out and S/P-dif-out are the same.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 114 115

No comments

D&R AXUM User Manual Page 17